Vagrant

Vagrant is an amazing tool for managing virtual machines via a simple to use command line interface.

Install

Vagrant uses Virtualbox to manage the virtual dependencies by default. (You can directly download virtualbox and install or use homebrew for it.) But I like using VMware Fusion 7 Professional with the Vagrant VMware provider.

I’m assuming you know how to download and install VMware Fusion the typical way.

```brew install caskroom/cask/brew-cask
vagrant plugin install vagrant-vmware-fusion
vagrant init precise64_vmware
vagrant up
vagrant ssh
```

SSHFS

Installation

An easy-to-use installer package for the latest version of SSHFS can be downloaded from the SSHFS repository’s download section. The package installs a self-contained (as in “does not depend on external libraries”) version of SSHFS. It supports Mac OS X 10.5 (Intel, PowerPC) and later.

Note: This build of SSHFS is based on the “FUSE for OS X” software, that is not contained in the installer package and has to be installed separately. The latest release of “FUSE for OS X” can be downloaded from http://osxfuse.github.com.

Macfusion

To use Macfusion with the newer “FUSE for OS X”-based version of SSHFS, put Macfusion in your Applications folder and run the following commands in Terminal. See 3. under “Frequently Asked Questions” for more information as to why you might want to use Macfusion.

```cd /Applications/Macfusion.app/Contents/PlugIns/sshfs.mfplugin/Contents/Resources
mv sshfs-static sshfs-static.orig
ln -s /usr/local/bin/sshfs sshfs-static
```

I ran into a problem though. I mount some of my servers via SSH, and even though the SSH account has write access to some files, OS X doesn’t let me open them with the standard “permission denied” error. This is because the user on the server has another UID than the local user on my mac. To get around this issue, I’ve entered the following line into the Extra Options (Advanced) field of MacFusion:

`-o idmap=user -o uid=501 -o gid=501`

This maps the remote UIDs to match those of the local system. If you’re on a mac, your user ID will most likely be 501. If not, make sure you enter the right ID.

A few more customizations:

```cd ~/vagrant/
vagrant ssh
useradd -d /home/preilly -m preilly -s /bin/bash -c "Patrick Reilly"
vim /etc/hostname #change to vagrant
vim /etc/hosts #change to vagrant
exit
vim /etc/hosts #add vagrant entry with previous ip from ifconfig
ssh vagrant
mkdir -p /home/preilly/.ssh
vim authorized_keys
chmod 700 /home/preilly/.ssh/
chmod 640 .ssh/authorized_keys
exit
ssh -A vagrant
```

Git

```sudo apt-get install git
git config --global user.name "Patrick Reilly"
git config --global user.email "patrick@kismatic.io"

```

So now I can use the Macfusion menu item to mount my Vagrant image as a local volume:

`cd /Volumes/vagrant/`

and use the editor of my choice to work with my home directory in Vagrant.

Docker

Prerequisites

Docker requires a 64-bit installation regardless of your Ubuntu version. Additionally, your kernel must be 3.10 at minimum. The latest 3.10 minor version or a newer maintained version are also acceptable.

Kernels older than 3.10 lack some of the features required to run Docker containers. These older versions are known to have bugs which cause data loss and frequently panic under certain conditions.

To check your current kernel version, open a terminal and use `uname -r` to display your kernel version:

```\$ ssh -A vagrant
\$ uname -r
3.2.0-29-virtual
\$ sudo apt-get update
\$ sudo apt-get install linux-image-generic-lts-trusty
\$ sudo reboot```

Get the latest Docker package

```\$ sudo apt-get install apparmor

\$ wget -qO- https://get.docker.com/ | sh
\$ sudo usermod -aG docker preilly```

Verify docker is installed correctly.

`\$ sudo docker run hello-world`

Installing Go

```\$ sudo apt-get install curl git mercurial make binutils bison gcc build-essential
\$ bash < <(curl -s -S -L https://raw.githubusercontent.com/moovweb/gvm/master/binscripts/gvm-installer)
\$ sudo apt-get install bison
\$ gvm install go1.4
\$ gvm use go1.4 --default
# I got bit by this issue: https://github.com/moovweb/gvm/issues/124
\$ sudo apt-get install python-software-properties
\$ sudo apt-get update
\$ sudo apt-get install git
\$ gvm use go1.4 --default

```

This is my current development environment on my MacBook. I’d really like to get others feedback or suggestions as well.

| 760 Words

PHP Next Generation

The PHP Group has put up a post about the future of PHP. They say, ‘Over the last year, some research into the possibility of introducing JIT compilation capabilities to PHP has been conducted. During this research, the realization was made that in order to achieve optimal performance from PHP, some internal API’s should be changed. This necessitated the birth of the phpng branch, initially authored by Dmitry Stogov, Xinchen Hui, and Nikita Popov. This branch does not include JIT capabilities, but rather seeks to solve those problems that prohibit the current, and any future implementation of a JIT capable executor achieving optimal performance by improving memory usage and cleaning up some core API’s. By making these improvements, the phpng branch gives us a considerable performance gain in real world applications, for example a 20% increase in throughput for WordPress. The door may well now be open for a JIT capable compiler that can perform as we expect, but it’s necessary to say that these changes stand strong on their own, without requiring a JIT capable compiler in the future to validate them.’

| 183 Words

Get Ready For a Streaming Music Die-Off

Streaming services are ailing. Pandora, the giant of its class and the survivor at 13 years old, is waging an ugly war to pay artists and labels less in order to stay afloat. Spotify, in spite of 6 million paid users and 18 million subscribers who humor some ads in their stream, has yet to turn a profit. Rhapsody axed 15% of its workforce right as Apple’s iTunes Radio hit the scene. On-demand competitor Rdio just opted for layoffs too, in order to move into a ‘scalable business model.’ Did no one wonder about that business-model bit in the beginning? Meanwhile, Turntable.fm, a comparatively tiny competitor with what should have been viral DNA, just pulled the plug on its virtual jam sessions this week—and it just might be the canary in the coal mine.

| 133 Words

How the Bitcoin protocol actually works

Many thousands of articles have been written purporting to explain Bitcoin, the online, peer-to-peer currency. Most of those articles give a hand-wavy account of the underlying cryptographic protocol, omitting many details. Even those articles which delve deeper often gloss over crucial points. My aim in this post is to explain the major ideas behind the Bitcoin protocol in a clear, easily comprehensible way. We’ll start from first principles, build up to a broad theoretical understanding of how the protocol works, and then dig down into the nitty-gritty, examining the raw data in a Bitcoin transaction.

Understanding the protocol in this detailed way is hard work. It is tempting instead to take Bitcoin as given, and to engage in speculation about how to get rich with Bitcoin, whether Bitcoin is a bubble, whether Bitcoin might one day mean the end of taxation, and so on. That’s fun, but severely limits your understanding. Understanding the details of the Bitcoin protocol opens up otherwise inaccessible vistas. In particular, it’s the basis for understanding Bitcoin’s built-in scripting language, which makes it possible to use Bitcoin to create new types of financial instruments, such as smart contracts. New financial instruments can, in turn, be used to create new markets and to enable new forms of collective human behaviour. Talk about fun!

I’ll describe Bitcoin scripting and concepts such as smart contracts in future posts. This post concentrates on explaining the nuts-and-bolts of the Bitcoin protocol. To understand the post, you need to be comfortable with public key cryptography, and with the closely related idea of digital signatures. I’ll also assume you’re familiar with cryptographic hashing. None of this is especially difficult. The basic ideas can be taught in freshman university mathematics or computer science classes. The ideas are beautiful, so if you’re not familiar with them, I recommend taking a few hours to get familiar.

It may seem surprising that Bitcoin’s basis is cryptography. Isn’t Bitcoin a currency, not a way of sending secret messages? In fact, the problems Bitcoin needs to solve are largely about securing transactions — making sure people can’t steal from one another, or impersonate one another, and so on. In the world of atoms we achieve security with devices such as locks, safes, signatures, and bank vaults. In the world of bits we achieve this kind of security with cryptography. And that’s why Bitcoin is at heart a cryptographic protocol.

My strategy in the post is to build Bitcoin up in stages. I’ll begin by explaining a very simple digital currency, based on ideas that are almost obvious. We’ll call that currency Infocoin, to distinguish it from Bitcoin. Of course, our first version of Infocoin will have many deficiencies, and so we’ll go through several iterations of Infocoin, with each iteration introducing just one or two simple new ideas. After several such iterations, we’ll arrive at the full Bitcoin protocol. We will have reinvented Bitcoin!

This strategy is slower than if I explained the entire Bitcoin protocol in one shot. But while you can understand the mechanics of Bitcoin through such a one-shot explanation, it would be difficult to understand why Bitcoin is designed the way it is. The advantage of the slower iterative explanation is that it gives us a much sharper understanding of each element of Bitcoin.

Finally, I should mention that I’m a relative newcomer to Bitcoin. I’ve been following it loosely since 2011 (and cryptocurrencies since the late 1990s), but only got seriously into the details of the Bitcoin protocol earlier this year. So I’d certainly appreciate corrections of any misapprehensions on my part. Also in the post I’ve included a number of “problems for the author” – notes to myself about questions that came up during the writing. You may find these interesting, but you can also skip them entirely without losing track of the main text.

First steps: a signed letter of intent

So how can we design a digital currency?

On the face of it, a digital currency sounds impossible. Suppose some person – let’s call her Alice – has some digital money which she wants to spend. If Alice can use a string of bits as money, how can we prevent her from using the same bit string over and over, thus minting an infinite supply of money? Or, if we can somehow solve that problem, how can we prevent someone else forging such a string of bits, and using that to steal from Alice?

These are just two of the many problems that must be overcome in order to use information as money.

As a first version of Infocoin, let’s find a way that Alice can use a string of bits as a (very primitive and incomplete) form of money, in a way that gives her at least some protection against forgery. Suppose Alice wants to give another person, Bob, an infocoin. To do this, Alice writes down the message “I, Alice, am giving Bob one infocoin”. She then digitally signs the message using a private cryptographic key, and announces the signed string of bits to the entire world.

(By the way, I’m using capitalized “Infocoin” to refer to the protocol and general concept, and lowercase “infocoin” to refer to specific denominations of the currency. A similar useage is common, though not universal, in the Bitcoin world.)

This isn’t terribly impressive as a prototype digital currency! But it does have some virtues. Anyone in the world (including Bob) can use Alice’s public key to verify that Alice really was the person who signed the message “I, Alice, am giving Bob one infocoin”. No-one else could have created that bit string, and so Alice can’t turn around and say “No, I didn’t mean to give Bob an infocoin”. So the protocol establishes that Alice truly intends to give Bob one infocoin. The same fact – no-one else could compose such a signed message – also gives Alice some limited protection from forgery. Of course, after Alice has published her message it’s possible for other people to duplicate the message, so in that sense forgery is possible. But it’s not possible from scratch. These two properties – establishment of intent on Alice’s part, and the limited protection from forgery – are genuinely notable features of this protocol.

I haven’t (quite) said exactly what digital money is in this protocol. To make this explicit: it’s just the message itself, i.e., the string of bits representing the digitally signed message “I, Alice, am giving Bob one infocoin”. Later protocols will be similar, in that all our forms of digital money will be just more and more elaborate messages [1].

Using serial numbers to make coins uniquely identifiable

A problem with the first version of Infocoin is that Alice could keep sending Bob the same signed message over and over. Suppose Bob receives ten copies of the signed message “I, Alice, am giving Bob one infocoin”. Does that mean Alice sent Bob tendifferent infocoins? Was her message accidentally duplicated? Perhaps she was trying to trick Bob into believing that she had given him ten different infocoins, when the message only proves to the world that she intends to transfer one infocoin.

What we’d like is a way of making infocoins unique. They need a label or serial number. Alice would sign the message “I, Alice, am giving Bob one infocoin, with serial number 8740348″. Then, later, Alice could sign the message “I, Alice, am giving Bob one infocoin, with serial number 8770431″, and Bob (and everyone else) would know that a different infocoin was being transferred.

To make this scheme work we need a trusted source of serial numbers for the infocoins. One way to create such a source is to introduce a bank. This bank would provide serial numbers for infocoins, keep track of who has which infocoins, and verify that transactions really are legitimate,

In more detail, let’s suppose Alice goes into the bank, and says “I want to withdraw one infocoin from my account”. The bank reduces her account balance by one infocoin, and assigns her a new, never-before used serial number, let’s say 1234567. Then, when Alice wants to transfer her infocoin to Bob, she signs the message “I, Alice, am giving Bob one infocoin, with serial number 1234567″. But Bob doesn’t just accept the infocoin. Instead, he contacts the bank, and verifies that: (a) the infocoin with that serial number belongs to Alice; and (b) Alice hasn’t already spent the infocoin. If both those things are true, then Bob tells the bank he wants to accept the infocoin, and the bank updates their records to show that the infocoin with that serial number is now in Bob’s possession, and no longer belongs to Alice.

Making everyone collectively the bank

This last solution looks pretty promising. However, it turns out that we can do something much more ambitious. We can eliminate the bank entirely from the protocol. This changes the nature of the currency considerably. It means that there is no longer any single organization in charge of the currency. And when you think about the enormous power a central bank has – control over the money supply – that’s a pretty huge change.

The idea is to make it so everyone (collectively) is the bank. In particular, we’ll assume that everyone using Infocoin keeps a complete record of which infocoins belong to which person. You can think of this as a shared public ledger showing all Infocoin transactions. We’ll call this ledger the block chain, since that’s what the complete record will be called in Bitcoin, once we get to it.

Now, suppose Alice wants to transfer an infocoin to Bob. She signs the message “I, Alice, am giving Bob one infocoin, with serial number 1234567″, and gives the signed message to Bob. Bob can use his copy of the block chain to check that, indeed, the infocoin is Alice’s to give. If that checks out then he broadcasts both Alice’s message and his acceptance of the transaction to the entire network, and everyone updates their copy of the block chain.

We still have the “where do serial number come from” problem, but that turns out to be pretty easy to solve, and so I will defer it to later, in the discussion of Bitcoin. A more challenging problem is that this protocol allows Alice to cheat by double spending her infocoin. She sends the signed message “I, Alice, am giving Bob one infocoin, with serial number 1234567″ to Bob, and the message”I, Alice, am giving Charlie one infocoin, with [the same] serial number 1234567″ to Charlie. Both Bob and Charlie use their copy of the block chain to verify that the infocoin is Alice’s to spend. Provided they do this verification at nearly the same time (before they’ve had a chance to hear from one another), both will find that, yes, the block chain shows the coin belongs to Alice. And so they will both accept the transaction, and also broadcast their acceptance of the transaction. Now there’s a problem. How should other people update their block chains? There may be no easy way to achieve a consistent shared ledger of transactions. And even if everyone can agree on a consistent way to update their block chains, there is still the problem that either Bob or Charlie will be cheated.

At first glance double spending seems difficult for Alice to pull off. After all, if Alice sends the message first to Bob, then Bob can verify the message, and tell everyone else in the network (including Charlie) to update their block chain. Once that has happened, Charlie would no longer be fooled by Alice. So there is most likely only a brief period of time in which Alice can double spend. However, it’s obviously undesirable to have any such a period of time. Worse, there are techniques Alice could use to make that period longer. She could, for example, use network traffic analysis to find times when Bob and Charlie are likely to have a lot of latency in communication. Or perhaps she could do something to deliberately disrupt their communications. If she can slow communication even a little that makes her task of double spending much easier.

How can we address the problem of double spending? The obvious solution is that when Alice sends Bob an infocoin, Bob shouldn’t try to verify the transcation alone. Rather, he should broadcast the possible transaction to the entire network of Infocoin users, and ask them to help determine whether the transaction is legitimate. If they collectively decide that the transaction is okay, then Bob can accept the infocoin, and everyone will update their block chain. This type of protocol can help prevent double spending, since if Alice tries to spend her infocoin with both Bob and Charlie, other people on the network will notice, and network users will tell both Bob and Charlie that there is a problem with the transaction, and the transaction shouldn’t go through.

In more detail, let’s suppose Alice wants to give Bob an infocoin. As before, she signs the message “I, Alice, am giving Bob one infocoin, with serial number 1234567″, and gives the signed message to Bob. Also as before, Bob does a sanity check, using his copy of the block chain to check that, indeed, the coin currently belongs to Alice. But at that point the protocol is modified. Bob doesn’t just go ahead and accept the transaction. Instead, he broadcast Alice’s message to the entire network. Other members of the network check to see whether Alice owns that infocoin. If so, they broadcast the message “Yes, Alice owns infocoin 1234567, it can now be transferred to Bob.” Once enough people have broadcast that message, everyone updates their block chain to show that infocoin 1234567 now belongs to Bob, and the transaction is complete.

This protocol has many imprecise elements at present. For instance, what does it mean to say “once enough people have broadcast that message”? What exactly does “enough” mean here? It can’t mean everyone in the network, since we don’t a prioriknow who is on the Infocoin network. For the same reason, it can’t mean some fixed fraction of users in the network. We won’t try to make these ideas precise right now. Instead, in the next section I’ll point out a serious problem with the approach as described. Fixing that problem will at the same time have the pleasant side effect of making the ideas above much more precise.

Proof-of-work

Suppose Alice wants to double spend in the network-based protocol I just described. She could do this by taking over the Infocoin network. Let’s suppose she uses an automated system to set up a large number of separate identities, let’s say a billion, on the Infocoin network. As before, she tries to double spend the same infocoin with both Bob and Charlie. But when Bob and Charlie ask the network to validate their respective transactions, Alice’s sock puppet identities swamp the network, announcing to Bob that they’ve validated his transaction, and to Charlie that they’ve validated his transaction, possibly fooling one or both into accepting the transaction.

There’s a clever way of avoiding this problem, using an idea known as proof-of-work. The idea is counterintuitive and involves a combination of two ideas: (1) to (artificially) make it computationally costly for network users to validate transactions; and (2) toreward them for trying to help validate transactions. The reward is used so that people on the network will try to help validate transactions, even though that’s now been made a computationally costly process. The benefit of making it costly to validate transactions is that validation can no longer be influenced by the number of network identities someone controls, but only by the total computational power they can bring to bear on validation. As we’ll see, with some clever design we can make it so a cheater would need enormous computational resources to cheat, making it impractical.

That’s the gist of proof-of-work. But to really understand proof-of-work, we need to go through the details.

Suppose Alice broadcasts to the network the news that “I, Alice, am giving Bob one infocoin, with serial number 1234567″.

As other people on the network hear that message, each adds it to a queue of pending transactions that they’ve been told about, but which haven’t yet been approved by the network. For instance, another network user named David might have the following queue of pending transactions:

I, Tom, am giving Sue one infocoin, with serial number 1201174.

I, Sydney, am giving Cynthia one infocoin, with serial number 1295618.

I, Alice, am giving Bob one infocoin, with serial number 1234567.

David checks his copy of the block chain, and can see that each transaction is valid. He would like to help out by broadcasting news of that validity to the entire network.

However, before doing that, as part of the validation protocol David is required to solve a hard computational puzzle – the proof-of-work. Without the solution to that puzzle, the rest of the network won’t accept his validation of the transaction.

What puzzle does David need to solve? To explain that, let $h$ be a fixed hash function known by everyone in the network – it’s built into the protocol. Bitcoin uses the well-known SHA-256 hash function, but any crypographically secure hash function will do. Let’s give David’s queue of pending transactions a label, $l$, just so it’s got a name we can refer to. Suppose David appends a number $x$ (called the nonce) to $l$and hashes the combination. For example, if we use $l =$ “Hello, world!” (obviously this is not a list of transactions, just a string used for illustrative purposes) and the nonce $x = 0$ then (output is in hexadecimal)

```h("Hello, world!0") =

The puzzle David has to solve – the proof-of-work – is to find a nonce $x$ such that when we append $x$ to $l$ and hash the combination the output hash begins with a long run of zeroes. The puzzle can be made more or less difficult by varying the number of zeroes required to solve the puzzle. A relatively simple proof-of-work puzzle might require just three or four zeroes at the start of the hash, while a more difficult proof-of-work puzzle might require a much longer run of zeros, say 15 consecutive zeroes. In either case, the above attempt to find a suitable nonce, with $x = 0$, is a failure, since the output doesn’t begin with any zeroes at all. Trying $x = 1$ doesn’t work either:

```h("Hello, world!1") =
e9afc424b79e4f6ab42d99c81156d3a17228d6e1eef4139be78e948a9332a7d8```

We can keep trying different values for the nonce, $x = 2, 3,\ldots$. Finally, at $x = 4250$ we obtain:

```h("Hello, world!4250") =
0000c3af42fc31103f1fdc0151fa747ff87349a4714df7cc52ea464e12dcd4e9```

This nonce gives us a string of four zeroes at the beginning of the output of the hash. This will be enough to solve a simple proof-of-work puzzle, but not enough to solve a more difficult proof-of-work puzzle.

What makes this puzzle hard to solve is the fact that the output from a cryptographic hash function behaves like a random number: change the input even a tiny bit and the output from the hash function changes completely, in a way that’s hard to predict. So if we want the output hash value to begin with 10 zeroes, say, then David will need, on average, to try $16^{10} \approx 10^{12}$ different values for $x$ before he finds a suitable nonce. That’s a pretty challenging task, requiring lots of computational power.

Obviously, it’s possible to make this puzzle more or less difficult to solve by requring more or fewer zeroes in the output from the hash function. In fact, the Bitcoin protocol gets quite a fine level of control over the difficulty of the puzzle, by using a slight variation on the proof-of-work puzzle described above. Instead of requiring leading zeroes, the Bitcoin proof-of-work puzzle requires the hash of a block’s header to be lower than or equal to a number known as the target. This target is automatically adjusted to ensure that a Bitcoin block takes, on average, about ten minutes to validate.

(In practice there is a sizeable randomness in how long it takes to validate a block – sometimes a new block is validated in just a minute or two, other times it may take 20 minutes or even longer. It’s straightforward to modify the Bitcoin protocol so that the time to validation is much more sharply peaked around ten minutes. Instead of solving a single puzzle, we can require that multiple puzzles be solved; with some careful design it is possible to considerably reduce the variance in the time to mine a block of transactions.)

Alright, let’s suppose David is lucky and finds a suitable nonce, $x$. Celebration! (He’ll be rewarded for finding the nonce, as described below). He broadcasts the block of transactions he’s approving to the network, together with the value for $x$. Other participants in the Infocoin network can verify that $x$ is a valid solution to the proof-of-work puzzle. And they then update their block chains to include the new block of transactions.

For the proof-of-work idea to have any chance of succeeding, network users need an incentive to help validate transactions. Without such an incentive, they have no reason to expend valuable computational power, merely to help validate other people’s transactions. And if network users are not willing to expend that power, then the whole system won’t work. The solution to this problem is to reward people who help validate transactions. In particular, suppose we reward whoever successfully validates a block of transactions by crediting them with some infocoins. Provided the infocoin reward is large enough that will give them an incentive to participate in validation.

In the Bitcoin protocol, this validation process is called mining. For each block of transactions validated, the successful miner receives a bitcoin reward. Initially, this was set to be a 50 bitcoin reward. But for every 210,000 validated blocks (roughly, once every four years) the reward halves. This has happened just once, to date, and so the current reward for mining a block is 25 bitcoins. This halving in the rate will continue every four years until the year 2140 CE. At that point, the reward for mining will drop below $10^{-8}$ bitcoins per block. $10^{-8}$ bitcoins is actually the minimal unit of Bitcoin, and is known as a satoshi. So in 2140 CE the total supply of bitcoins will cease to increase. However, that won’t eliminate the incentive to help validate transactions. Bitcoin also makes it possible to set aside some currency in a transaction as a transaction fee, which goes to the miner who helps validate it. In the early days of Bitcoin transaction fees were mostly set to zero, but as Bitcoin has gained in popularity, transaction fees have gradually risen, and are now a substantial additional incentive on top of the 25 bitcoin reward for mining a block.

You can think of proof-of-work as a competition to approve transactions. Each entry in the competition costs a little bit of computing power. A miner’s chance of winning the competition is (roughly, and with some caveats) equal to the proportion of the total computing power that they control. So, for instance, if a miner controls one percent of the computing power being used to validate Bitcoin transactions, then they have roughly a one percent chance of winning the competition. So provided a lot of computing power is being brought to bear on the competition, a dishonest miner is likely to have only a relatively small chance to corrupt the validation process, unless they expend a huge amount of computing resources.

Of course, while it’s encouraging that a dishonest party has only a relatively small chance to corrupt the block chain, that’s not enough to give us confidence in the currency. In particular, we haven’t yet conclusively addressed the issue of double spending.

I’ll analyse double spending shortly. Before doing that, I want to fill in an important detail in the description of Infocoin. We’d ideally like the Infocoin network to agree upon the order in which transactions have occurred. If we don’t have such an ordering then at any given moment it may not be clear who owns which infocoins. To help do this we’ll require that new blocks always include a pointer to the last block validated in the chain, in addition to the list of transactions in the block. (The pointer is actually just a hash of the previous block). So typically the block chain is just a linear chain of blocks of transactions, one after the other, with later blocks each containing a pointer to the immediately prior block:

Occasionally, a fork will appear in the block chain. This can happen, for instance, if by chance two miners happen to validate a block of transactions near-simultaneously – both broadcast their newly-validated block out to the network, and some people update their block chain one way, and others update their block chain the other way:

This causes exactly the problem we’re trying to avoid – it’s no longer clear in what order transactions have occurred, and it may not be clear who owns which infocoins. Fortunately, there’s a simple idea that can be used to remove any forks. The rule is this: if a fork occurs, people on the network keep track of both forks. But at any given time, miners only work to extend whichever fork is longest in their copy of the block chain.

Suppose, for example, that we have a fork in which some miners receive block A first, and some miners receive block B first. Those miners who receive block A first will continue mining along that fork, while the others will mine along fork B. Let’s suppose that the miners working on fork B are the next to successfully mine a block:

After they receive news that this has happened, the miners working on fork A will notice that fork B is now longer, and will switch to working on that fork. Presto, in short order work on fork A will cease, and everyone will be working on the same linear chain, and block A can be ignored. Of course, any still-pending transactions in A will still be pending in the queues of the miners working on fork B, and so all transactions will eventually be validated.

Likewise, it may be that the miners working on fork A are the first to extend their fork. In that case work on fork B will quickly cease, and again we have a single linear chain.

No matter what the outcome, this process ensures that the block chain has an agreed-upon time ordering of the blocks. In Bitcoin proper, a transaction is not considered confirmed until: (1) it is part of a block in the longest fork, and (2) at least 5 blocks follow it in the longest fork. In this case we say that the transaction has “6 confirmations”. This gives the network time to come to an agreed-upon the ordering of the blocks. We’ll also use this strategy for Infocoin.

With the time-ordering now understood, let’s return to think about what happens if a dishonest party tries to double spend. Suppose Alice tries to double spend with Bob and Charlie. One possible approach is for her to try to validate a block that includes both transactions. Assuming she has one percent of the computing power, she will occasionally get lucky and validate the block by solving the proof-of-work. Unfortunately for Alice, the double spending will be immediately spotted by other people in the Infocoin network and rejected, despite solving the proof-of-work problem. So that’s not something we need to worry about.

A more serious problem occurs if she broadcasts two separate transactions in which she spends the same infocoin with Bob and Charlie, respectively. She might, for example, broadcast one transaction to a subset of the miners, and the other transaction to another set of miners, hoping to get both transactions validated in this way. Fortunately, in this case, as we’ve seen, the network will eventually confirm one of these transactions, but not both. So, for instance, Bob’s transaction might ultimately be confirmed, in which case Bob can go ahead confidently. Meanwhile, Charlie will see that his transaction has not been confirmed, and so will decline Alice’s offer. So this isn’t a problem either. In fact, knowing that this will be the case, there is little reason for Alice to try this in the first place.

An important variant on double spending is if Alice = Bob, i.e., Alice tries to spend a coin with Charlie which she is also “spending” with herself (i.e., giving back to herself). This sounds like it ought to be easy to detect and deal with, but, of course, it’s easy on a network to set up multiple identities associated with the same person or organization, so this possibility needs to be considered. In this case, Alice’s strategy is to wait until Charlie accepts the infocoin, which happens after the transaction has been confirmed 6 times in the longest chain. She will then attempt to fork the chain before the transaction with Charlie, adding a block which includes a transaction in which she pays herself:

Unfortunately for Alice, it’s now very difficult for her to catch up with the longer fork. Other miners won’t want to help her out, since they’ll be working on the longer fork. And unless Alice is able to solve the proof-of-work at least as fast as everyone else in the network combined – roughly, that means controlling more than fifty percent of the computing power – then she will just keep falling further and further behind. Of course, she might get lucky. We can, for example, imagine a scenario in which Alice controls one percent of the computing power, but happens to get lucky and finds six extra blocks in a row, before the rest of the network has found any extra blocks. In this case, she might be able to get ahead, and get control of the block chain. But this particular event will occur with probability $1/100^6 = 10^{-12}$. A more general analysis along these lines shows that Alice’s probability of ever catching up is infinitesimal, unless she is able to solve proof-of-work puzzles at a rate approaching all other miners combined.

Of course, this is not a rigorous security analysis showing that Alice cannot double spend. It’s merely an informal plausibility argument. The original paper introducing Bitcoin did not, in fact, contain a rigorous security analysis, only informal arguments along the lines I’ve presented here. The security community is still analysing Bitcoin, and trying to understand possibility vulnerabilities. You can see some of this researchlisted here, and I mention a few related problems in the “Problems for the author” below. At this point I think it’s fair to say that the jury is still out on how secure Bitcoin is.

The proof-of-work and mining ideas give rise to many questions. How much reward is enough to persuade people to mine? How does the change in supply of infocoins affect the Infocoin economy? Will Infocoin mining end up in concentrated in the hands of a few, or many? If it’s just a few, doesn’t that endanger the security of the system? Presumably transaction fees will eventually equilibriate – won’t this introduce an unwanted source of friction, and make small transactions less desirable? These are all great questions, but beyond the scope of this post. I may come back to the questions (in the context of Bitcoin) in a future post. For now, we’ll stick to our focus on understanding how the Bitcoin protocol works.

Problems for the author

• I don’t understand why double spending can’t be prevented in a simpler manner using two-phase commit. Suppose Alice tries to double spend an infocoin with both Bob and Charlie. The idea is that Bob and Charlie would each broadcast their respective messages to the Infocoin network, along with a request: “Should I accept this?” They’d then wait some period – perhaps ten minutes – to hear any naysayers who could prove that Alice was trying to double spend. If no such nays are heard (and provided there are no signs of attempts to disrupt the network), they’d then accept the transaction. This protocol needs to be hardened against network attacks, but it seems to me to be the core of a good alternate idea. How well does this work? What drawbacks and advantages does it have compared to the full Bitcoin protocol?
• Early in the section I mentioned that there is a natural way of reducing the variance in time required to validate a block of transactions. If that variance is reduced too much, then it creates an interesting attack possibility. Suppose Alice tries to fork the chain in such a way that: (a) one fork starts with a block in which Alice pays herself, while the other fork starts with a block in which Alice pays Bob; (b) both blocks are announced nearly simultaneously, so roughly half the miners will attempt to mine each fork; (c) Alice uses her mining power to try to keep the forks of roughly equal length, mining whichever fork is shorter – this is ordinarily hard to pull off, but becomes significantly easier if the standard deviation of the time-to-validation is much shorter than the network latency; (d) after 5 blocks have been mined on both forks, Alice throws her mining power into making it more likely that Charles’s transaction is confirmed; and (e) after confirmation of Charles’s transaction, she then throws her computational power into the other fork, and attempts to regain the lead. This balancing strategy will have only a small chance of success. But while the probability is small, it will certainly be much larger than in the standard protocol, with high variance in the time to validate a block. Is there a way of avoiding this problem?
• Suppose Bitcoin mining software always explored nonces starting with $x = 0$, then $x = 1, x = 2,\ldots$. If this is done by all (or even just a substantial fraction) of Bitcoin miners then it creates a vulnerability. Namely, it’s possible for someone to improve their odds of solving the proof-of-work merely by starting with some other (much larger) nonce. More generally, it may be possible for attackers to exploit any systematic patterns in the way miners explore the space of nonces. More generally still, in the analysis of this section I have implicitly assumed a kind of symmetry between different miners. In practice, there will be asymmetries and a thorough security analysis will need to take account of those asymmetries.

Bitcoin

Let’s move away from Infocoin, and describe the actual Bitcoin protocol. There are a few new ideas here, but with one exception (discussed below) they’re mostly obvious modifications to Infocoin.

To use Bitcoin in practice, you first install a wallet program on your computer. To give you a sense of what that means, here’s a screenshot of a wallet called Multbit. You can see the Bitcoin balance on the left — 0.06555555 Bitcoins, or about 70 dollars at the exchange rate on the day I took this screenshot — and on the right two recent transactions, which deposited those 0.06555555 Bitcoins:

Suppose you’re a merchant who has set up an online store, and you’ve decided to allow people to pay using Bitcoin. What you do is tell your wallet program to generate a Bitcoin address. In response, it will generate a public / private key pair, and then hash the public key to form your Bitcoin address:

You then send your Bitcoin address to the person who wants to buy from you. You could do this in email, or even put the address up publicly on a webpage. This is safe, since the address is merely a hash of your public key, which can safely be known by the world anyway. (I’ll return later to the question of why the Bitcoin address is a hash, and not just the public key.)

The person who is going to pay you then generates a transaction. Let’s take a look at the data from an actual transaction transferring $0.31900000$ bitcoins. What’s shown below is very nearly the raw data. It’s changed in three ways: (1) the data has been deserialized; (2) line numbers have been added, for ease of reference; and (3) I’ve abbreviated various hashes and public keys, just putting in the first six hexadecimal digits of each, when in reality they are much longer. Here’s the data:

```1.  {"hash":"7c4025...",
2.  "ver":1,
3.  "vin_sz":1,
4.  "vout_sz":1,
5.  "lock_time":0,
6.  "size":224,
7.  "in":[
8.    {"prev_out":
9.      {"hash":"2007ae...",
10.      "n":0},
11.    "scriptSig":"304502... 042b2d..."}],
12. "out":[
13.   {"value":"0.31900000",
14.    "scriptPubKey":"OP_DUP OP_HASH160 a7db6f OP_EQUALVERIFY OP_CHECKSIG"}]}```

Let’s go through this, line by line.

Line 1 contains the hash of the remainder of the transaction, 7c4025..., expressed in hexadecimal. This is used as an identifier for the transaction.

Line 2 tells us that this is a transaction in version 1 of the Bitcoin protocol.

Lines 3 and 4 tell us that the transaction has one input and one output, respectively. I’ll talk below about transactions with more inputs and outputs, and why that’s useful.

Line 5 contains the value for lock_time, which can be used to control when a transaction is finalized. For most Bitcoin transactions being carried out today thelock_time is set to 0, which means the transaction is finalized immediately.

Line 6 tells us the size (in bytes) of the transaction. Note that it’s not the monetary amount being transferred! That comes later.

Lines 7 through 11 define the input to the transaction. In particular, lines 8 through 10 tell us that the input is to be taken from the ouput from an earlier transaction, with the given hash, which is expressed in hexadecimal as 2007ae.... The n=0 tells us it’s to be the first output from that transaction; we’ll see soon how multiple outputs (and inputs) from a transaction work, so don’t worry too much about this for now. Line 11 contains the signature of the person sending the money, 304502..., followed by a space, and then the corresponding public key, 04b2d.... Again, these are both in hexadecimal.

One thing to note about the input is that there’s nothing explicitly specifying how many bitcoins from the previous transaction should be spent in this transaction. In fact, all the bitcoins from the n=0th output of the previous transaction are spent. So, for example, if the n=0th output of the earlier transaction was 2 bitcoins, then 2 bitcoins will be spent in this transaction. This seems like an inconvenient restriction – like trying to buy bread with a 20 dollar note, and not being able to break the note down. The solution, of course, is to have a mechanism for providing change. This can be done using transactions with multiple inputs and outputs, which we’ll discuss in the next section.

Lines 12 through 14 define the output from the transaction. In particular, line 13 tells us the value of the output, 0.39 bitcoins. Line 14 is somewhat complicated. The main thing to note is that the string a7db6f... is the Bitcoin address of the intended recipient of the funds (written in hexadecimal). In fact, Line 14 is actually an expression in Bitcoin’s scripting language. I’m not going to describe that language in detail in this post, the important thing to take away now is just that a7db6f... is the Bitcoin address.

You can now see, by the way, how Bitcoin addresses the question I swept under the rug in the last section: where do Bitcoin serial numbers come from? In fact, the role of the serial number is played by transaction hashes. In the transaction above, for example, the recipient is receiving 0.39 Bitcoins, which come out of the first output of an earlier transaction with hash 2007ae... (line 9). If you go and look in the block chain for that transaction, you’d see that its output comes from a still earlier transaction. And so on.

There are two clever things about using transaction hashes instead of serial numbers. First, in Bitcoin there’s not really any separate, persistent “coins” at all, just a long series of transactions in the block chain. It’s a clever idea to realize that you don’t need persistent coins, and can just get by with a ledger of transactions. Second, by operating in this way we remove the need for any central authority issuing serial numbers. Instead, the serial numbers can be self-generated, merely by hashing the transaction.

In fact, it’s possible to keep following the chain of transactions further back in history. Ultimately, this process must terminate. This can happen in one of two ways. The first possibilitity is that you’ll arrive at the very first Bitcoin transaction, contained in the so-called Genesis block. This is a special transaction, having no inputs, but a 50 Bitcoin output. In other words, this transaction establishes an initial money supply. The Genesis block is treated separately by Bitcoin clients, and I won’t get into the details here, although it’s along similar lines to the transaction above. You can see the deserialized raw data here, and read about the Genesis block here.

The second possibility when you follow a chain of transactions back in time is that eventually you’ll arrive at a so-called coinbase transaction. With the exception of the Genesis block, every block of transactions in the block chain starts with a special coinbase transaction. This is the transaction rewarding the miner who validated that block of transactions. It uses a similar but not identical format to the transaction above. I won’t go through the format in detail, but if you want to see an example, seehere. You can read a little more about coinbase transactions here.

Something I haven’t been precise about above is what exactly is being signed by the digital signature in line 11. The obvious thing to do is for the payer to sign the whole transaction (apart from the transaction hash, which, of course, must be generated later). Currently, this is not what is done – some pieces of the transaction are omitted. This makes some pieces of the transaction malleable, i.e., they can be changed later. However, this malleability does not include the amounts being paid out, senders and recipients, which can’t be changed later. I must admit I haven’t dug down into the details here. I gather that this malleability is under discussion in the Bitcoin developer community, and there are efforts afoot to reduce or eliminate this malleability.

Transactions with multiple inputs and outputs

In the last section I described how a transaction with a single input and a single output works. In practice, it’s often extremely convenient to create Bitcoin transactions with multiple inputs or multiple outputs. I’ll talk below about why this can be useful. But first let’s take a look at the data from an actual transaction:

```1. {"hash":"993830...",
2. "ver":1,
3. "vin_sz":3,
4.  "vout_sz":2,
5.  "lock_time":0,
6.  "size":552,
7.  "in":[
8.    {"prev_out":{
9.      "hash":"3beabc...",
10.        "n":0},
11.     "scriptSig":"304402... 04c7d2..."},
12.    {"prev_out":{
13.        "hash":"fdae9b...",
14.        "n":0},
15.      "scriptSig":"304502... 026e15..."},
16.    {"prev_out":{
17.        "hash":"20c86b...",
18.        "n":1},
19.      "scriptSig":"304402... 038a52..."}],
20.  "out":[
21.    {"value":"0.01068000",
22.      "scriptPubKey":"OP_DUP OP_HASH160 e8c306... OP_EQUALVERIFY OP_CHECKSIG"},
23.    {"value":"4.00000000",
24.      "scriptPubKey":"OP_DUP OP_HASH160 d644e3... OP_EQUALVERIFY OP_CHECKSIG"}]}```

Let’s go through the data, line by line. It’s very similar to the single-input-single-output transaction, so I’ll do this pretty quickly.

Line 1 contains the hash of the remainder of the transaction. This is used as an identifier for the transaction.

Line 2 tells us that this is a transaction in version 1 of the Bitcoin protocol.

Lines 3 and 4 tell us that the transaction has three inputs and two outputs, respectively.

Line 5 contains the lock_time. As in the single-input-single-output case this is set to 0, which means the transaction is finalized immediately.

Line 6 tells us the size of the transaction in bytes.

Lines 7 through 19 define a list of the inputs to the transaction. Each corresponds to an output from a previous Bitcoin transaction.

The first input is defined in lines 8 through 11.

In particular, lines 8 through 10 tell us that the input is to be taken from the n=0th output from the transaction with hash 3beabc.... Line 11 contains the signature, followed by a space, and then the public key of the person sending the bitcoins.

Lines 12 through 15 define the second input, with a similar format to lines 8 through 11. And lines 16 through 19 define the third input.

Lines 20 through 24 define a list containing the two outputs from the transaction.

The first output is defined in lines 21 and 22. Line 21 tells us the value of the output, 0.01068000 bitcoins. As before, line 22 is an expression in Bitcoin’s scripting language. The main thing to take away here is that the string e8c30622... is the Bitcoin address of the intended recipient of the funds.

The second output is defined lines 23 and 24, with a similar format to the first output.

One apparent oddity in this description is that although each output has a Bitcoin value associated to it, the inputs do not. Of course, the values of the respective inputs can be found by consulting the corresponding outputs in earlier transactions. In a standard Bitcoin transaction, the sum of all the inputs in the transaction must be at least as much as the sum of all the outputs. (The only exception to this principle is the Genesis block, and in coinbase transactions, both of which add to the overall Bitcoin supply.) If the inputs sum up to more than the outputs, then the excess is used as a transaction fee. This is paid to whichever miner successfully validates the block which the current transaction is a part of.

That’s all there is to multiple-input-multiple-output transactions! They’re a pretty simple variation on single-input-single-output-transactions.

One nice application of multiple-input-multiple-output transactions is the idea ofchange. Suppose, for example, that I want to send you 0.15 bitcoins. I can do so by spending spending money from a previous transaction in which I received 0.2 bitcoins. Of course, I don’t want to send you the entire 0.2 bitcoins. The solution is to send you 0.15 bitcoins, and to send 0.05 bitcoins to a Bitcoin address which I own. Those 0.05 bitcoins are the change. Of course, it differs a little from the change you might receive in a store, since change in this case is what you pay yourself. But the broad idea is similar.

Conclusion

That completes a basic description of the main ideas behind Bitcoin. Of course, I’ve omitted many details – this isn’t a formal specification. But I have described the main ideas behind the most common use cases for Bitcoin.

While the rules of Bitcoin are simple and easy to understand, that doesn’t mean that it’s easy to understand all the consequences of the rules. There is vastly more that could be said about Bitcoin, and I’ll investigate some of these issues in future posts.

For now, though, I’ll wrap up by addressing a few loose ends.

How anonymous is Bitcoin? Many people claim that Bitcoin can be used anonymously. This claim has led to the formation of marketplaces such as Silk Road(and various successors), which specialize in illegal goods. However, the claim that Bitcoin is anonymous is a myth. The block chain is public, meaning that it’s possible for anyone to see every Bitcoin transaction ever. Although Bitcoin addresses aren’t immediately associated to real-world identities, computer scientists have done agreat deal of work figuring out how to de-anonymize “anonymous” social networks. The block chain is a marvellous target for these techniques. I will be extremely surprised if the great majority of Bitcoin users are not identified with relatively high confidence and ease in the near future. The confidence won’t be high enough to achieve convictions, but will be high enough to identify likely targets. Furthermore, identification will be retrospective, meaning that someone who bought drugs on Silk Road in 2011 will still be identifiable on the basis of the block chain in, say, 2020. These de-anonymization techniques are well known to computer scientists, and, one presumes, therefore to the NSA. I would not be at all surprised if the NSA and other agencies have already de-anonymized many users. It is, in fact, ironic that Bitcoin is often touted as anonymous. It’s not. Bitcoin is, instead, perhaps the most open and transparent financial instrument the world has ever seen.

Can you get rich with Bitcoin? Well, maybe. Tim O’Reilly once said: “Money is like gas in the car – you need to pay attention or you’ll end up on the side of the road – but a well-lived life is not a tour of gas stations!” Much of the interest in Bitcoin comes from people whose life mission seems to be to find a really big gas station. I must admit I find this perplexing. What is, I believe, much more interesting and enjoyable is to think of Bitcoin and other cryptocurrencies as a way of enabling new forms of collective behaviour. That’s intellectually fascinating, offers marvellous creative possibilities, is socially valuable, and may just also put some money in the bank. But if money in the bank is your primary concern, then I believe that other strategies are much more likely to succeed.

Details I’ve omitted: Although this post has described the main ideas behind Bitcoin, there are many details I haven’t mentioned. One is a nice space-saving trick used by the protocol, based on a data structure known as a Merkle tree. It’s a detail, but a splendid detail, and worth checking out if fun data structures are your thing. You can get an overview in the original Bitcoin paper. Second, I’ve said little about theBitcoin network – questions like how the network deals with denial of service attacks, how nodes join and leave the network, and so on. This is a fascinating topic, but it’s also something of a mess of details, and so I’ve omitted it. You can read more about it at some of the links above.

Bitcoin scripting: In this post I’ve explained Bitcoin as a form of digital, online money. But this is only a small part of a much bigger and more interesting story. As we’ve seen, every Bitcoin transaction is associated to a script in the Bitcoin programming language. The scripts we’ve seen in this post describe simple transactions like “Alice gave Bob 10 bitcoins”. But the scripting language can also be used to express far more complicated transactions. To put it another way, Bitcoin isprogrammable money. In later posts I will explain the scripting system, and how it is possible to use Bitcoin scripting as a platform to experiment with all sorts of amazing financial instruments.

Footnote

[1] In the United States the question “Is money a form of speech?” is an important legal question, because of the protection afforded speech under the US Constitution. In my (legally uninformed) opinion digital money may make this issue more complicated. As we’ll see, the Bitcoin protocol is really a way of standing up before the rest of the world (or at least the rest of the Bitcoin network) and avowing “I’m going to give such-and-such a number of bitcoins to so-and-so a person” in a way that’s extremely difficult to repudiate. At least naively, it looks more like speech than exchanging copper coins, say.

| 8,678 Words

Temporarily Disable Puppet

This is can be done by an admin disabled of Puppet

`# puppet agent --disable "Reason why disabled"`

To make sure it’s disable, just do a Puppet run;

```# puppet agent -t
Notice: Skipping run of Puppet configuration client; administratively disabled (Reason: 'Testing some new things');
Use 'puppet agent --enable' to re-enable.```

To enable:

`puppet agent --enable`
| 56 Words

Maven — Making both a War and Jar at the same time

Maven nicely automates building WAR files, but it places your compiled classes in WEB-INF/classes instead of making a new jar in /WEB-INF/lib.

If you want your code to be compiled as a .jar as well as a .war, you can do this by specifying the jar goal in the command line:

`[shell>mvn clean jar install`

Note this will make myproject.jar in target/, not in target/myproject/WEB-INF/lib, so you will need to use the Ant plugin to move this stuff around.

But this is not always an option: for deep, modular builds using the reactor, you may want to build your whole thing using one “mvn install”. To do this, do the following:

1. Specify “war” packaging at the top of your pom.xml.
``````<?xml version="1.0" encoding="UTF-8"?>
<build>
<plugins>
<plugin>
<groupId>org.apache.maven.plugins</groupId>
<artifactId>maven-jar-plugin</artifactId>
<executions>
<execution>
<id>make-a-jar</id>
<phase>compile</phase>
<goals>
<goal>jar</goal>
</goals>
</execution>
</executions>
</plugin>
</plugins>
</build>``````

And that’s it. Do a “maven install” and you get both a jar as well as a war.

| 235 Words

Getting Started With Hadoop Using Hortonworks Sandbox

Getting started with a distributed system like Hadoop can be a daunting task for developers. From installing and configuring Hadoop to learning the basics of MapReduce and other add-on tools, the learning curve is pretty high.

Hortonworks recently released the Hortonworks Sandbox for anyone interested in learning and evaluating enterprise Hadoop.

The Hortonworks Sandbox provides:

1. A virtual machine with Hadoop preconfigured.
2. A set of hands-on tutorials to get you started with Hadoop.
3. An environment to help you explore related projects in the Hadoop ecosystem like Apache Pig, Apache Hive, Apache HCatalog and Apache HBase.

http://hortonworks.com/products/hortonworks-sandbox/

The Sandbox download is available for both VirtualBox and VMware Fusion/Player environments. Just follow the instruction to import the Sandbox into your environment.

The download is an OVA (open virtual appliance), which is really a TAR file.

Untar it and the archive consists of an OVF (Open Virtualization Format) descriptor file, a manifest file and a disk image of vmdk format.

Rackspace Cloud doesn’t let you upload your own images, but if you have an OpenStack based cloud, you can boot a virtual machine with the image provided.

First, you can convert the vmdk image to a more familiar format like qcow2.

Now, let’s upload the image to Glance.

Now let’s create a virtual server off of the new image – give at least 4GB of RAM.

Once the instance goes to ACTIVE status and that the instance pings, you can ssh into the instance using

Watch `/var/log/boot.log` as the services are coming up, and it will let you know when the installation is complete. This can take about 10 minutes.

At the end, you should have these java processes running:

Go to the browser at http://instance_ip and your single node Hadoop cluster should be running. Just follow through the UI; it has demos, videos and step-by-step hands-on tutorials on Hadoop, Pig, Hive and HCatalog.

| 409 Words

Monitoring Gearman over Telnet port 4730

So, the only way to monitor the Gearman daemon is via telnet to port 4730.

The current monitoring supported commands are really fairly basic.

I could not locate any documentation on the support commands so had to, “literally look at the code to figure out the supported commands” (the below command documentation is copied from the comments in code).

Note: There are plans to include more set of commands in the next release.

Command: STATUS

The output format of this function is tab separated columns as follows, followed by a line consisting of a full stop and a newline (”.n”) to indicate the end of output, below are the columns shown:

– Function name : A string denoting the name of the function of the job
– Number in queue : A positive integer indicating the total number of jobs for this function in the queue. This includes currently running ones as well (next column)
– Number of jobs running : A positive integer showing how many jobs of this function are currently running
– Number of capable workers : A positive integer denoting the maximum possible count of workers that could be doing this job. Though they may not all be working on it due to other tasks holding them busy.

GroupNews    2    1    1

Command : WORKERS

This command show the details of various clients registered with the “gearmand” server. For each worker it shows the following info:

– Peer IP: Client remote host
Client ID: Unique ID assigned to client
– Functions: List of functions this client has registered for.

11 :: – : GroupNews

Any other command text throws a error “ERR unknown_command Unknown+server+command”

Here is a simple PHP class, to get the output of the two currently supported monitoring commands:

| 291 Words

Join the PHP Evangelism Team

As, fellow members of the PHP Development Team we are all called to be developer evangelists to the PHP Community.

So, what is our cause, our reason for being… how are we trying to change the “Web 2.0″ world?

The goal of the PHP Evangelism Team is to bring together the right people, resources and experience from across the PHP Community to provide developers with the process guidance and best practices needed to create new opportunities for the web.

We also ensure the various PHP User Groups, get adequate support – as well, as publicize PHP related events.

Patrick Reilly
PHP Evangelism Team

To subscribe send a blank email message to: php-evangelism-subscribe@lists.php.net or, use the Mailing Lists page on PHP.net

Also, you can show your support for our collective efforts by joining the group on Facebook.

| 138 Words

hoity-toity a.k.a. hotty toddy – now who is playing the fool with the Valley of the Heart’s Delight

So, for what it is worth, “Hotty Toddy” is simply the best damned fight song in the history of college sports; it can be heard at any Ole Miss football game.

I’m the geeky (and damn, I am a geek!) left coast tech consultant who bent Nicholas’ ear yesterday– it was my first time deep into SOHO, and I just wanted so much to fit in, when really, I never should have left my basement yesterday morning…. but hey, I gave him the headline for his story!

Yes, I attended both the Lunch 2.0 in San Francisco and the event at TheLadders.com (did you know they are hiring – if you know Java and live in NYC give them a call – really nice looking place) yesterday here in New York City.

Yes, a “Hot Toddy” is the name given to a mixed drink that is served hot. Although it originated in Scotland, there are many variations; the essential elements are as follows: a spirit base such as brandy, rum or whiskey a hot liquid — hot tea, coffee, cocoa, water, etc. and last but not least a sweetener, such as honey, sugar or syrup.

Damn, I’m loving NYC already….. Free DRINKS on me for next month’s event!
Or, maybe the fine folks running Lunch 2.0 should do Happy Hour 2.0 and we can try some common “Hot Toddy” variants – click here for a sneak peek.

But, in common speech, “hoity-toity” is an adjective used with disdain to refer to the pretentious, those who put on a show of pretending to possess refinement and sophistication (similar to “highfalutin” is that even a word).

The expression “Hoity-toity” comes from our penchant for creating rhyming phrases such as “loosey-goosey” or “helter-skelter,” and in this case its base is “hoit,” a 16th century verb whose meaning is “to play the fool” or “to indulge in riotous and noisy mirth.” (”Hoity-toity” was more commonly used to describe those who engaged in thoughtlessly silly or frivolous behavior before it became more of a synonym for “pretentious.”) Attempts to find the word “haughty” an ancestor of “hoity-toity” are equally specious.

So, no disrespect to your coast – but, what was meant to be expressed is that there are indeed cultural differences between the two coasts. Not that one is right and the other is wrong or anything like that, but I do feel somewhat more connected having experienced both coasts intimately and currently living a bicoastal lifestyle.

Silicon Valley was originally called “The Valley of the Heart’s Delight” and in 1971 a journalist dubbed it Silicon Valley. But, to be fair if it were to be named accurately again today, it probably would be called “The Valley of the Virtual Community” because that truly is what Social networking web properties (e.g., Facebook, Tagged, MySpace) are really all about.

This other guy Lenin said that we have to keep the revolution forever young, and that’s is very, very hard to do these days. There are a lot of companies that die. So, one way of approaching renewal is to start all over again with a new company – that’s something that America seems to be quite good at. (This is a cornerstone of our economic infrastructure.) It’s a precious national asset, and policy-makers have to be careful not to get in the way of our free market ways.

We, as the emerging leaders of the Web 2.0 revolution, continually have to make strategic decisions that take a lot of courage to stick with. It becomes not so much a test of IQ points—because let’s face it you don’t get to this level if you’re not smart—but a test of character and the courage of your own convictions. Courage with regard not just to ethics but to strategy. So, I meant no disrespect to my new-found fellow New Yorkers by acknowledging the differences between coasts, although I now realize that it makes a far better punch-line for journalists just wanting to act cool, or stick to the shtick. Rather, it was meant to highlight the differences in order to emphasize the importance of playing to our strengths. New York’s Lunch 2.0 doesn’t have to be the same as Terry Chay’s to be successful.

viva la’ chay!
[To Be Continued…]

| 722 Words

Last day at Schematic

Today was my last day working for Schematic as an employee.

I look forward to a new day… with a new set of challenges.

To everyone at Schematic; I wish you the best and appreciate the opportunities that I was giving duing my time with you.

| 46 Words

Congratulations! I have been accepted as a presenter…

I have been accepted as a presenter for
the O’Reilly Open Source Convention 2007 at the
Oregon Convention Center, July 23, 2007 – July 27, 2007.

The following has been accepted as a session for the event:

“Improving Performance by Profiling PHP Applications”

They are still building the program and so will be determining final session
date and time shortly.
Also, the program schedule is subject to change.

| 64 Words

Zend Framework Project Teams Need You

Most components and subprojects need volunteers to help with documentation, unit test coverage, code reviews, improving integration with other ZF components, and enhancing architecture and design for the purpose of improving extensibility and ease of use with new components. If you see a subject area or component that interests you, please contact any project members currently associated with the component.

The license is BSD-based. It can be found here.
Sign the Contributor License Agreement (CLA)

To contribute source code or documentation at any level (from a few lines, to a patch, to a proposal, to an entirely new component), you must first sign the Contributor License Agreement. This will also give you access to become a developer in the issue tracking system and the developer’s wiki.

CLA signers who also establish a wiki account on this website will be listed on our Project Teams page.
Thus, others will know who to accept code contributions from and who they can work with in drafting proposals.

Subscribe to the appropriate mailing lists

Please join the Zend Framework community by subscribing to the mailing lists that interest you, using the e-mail account you wish to send messages from.

| 199 Words

Why PHP?

So, yesterday after reading Ben Ramsey’s post, “Business Case for PHP” I decided to join Stuart Herbert ’s Google Group for developing a business case for PHP.

I am very interested in the outcome of the group’s research:

* Concerns about PHP being open-source
* Security concerns about PHP itself
* Security concerns about software written in PHP
* Performance and scalability
* Finding credible case studies / references for vertical markets
(e.g., insurance, health, finance, etc.)
What do you want to see the business case cover?
Join the, “Why PHP?” – Google Group today!

| 91 Words

March To Be Month of PHP Bugs (Bring It On)

During Stefan Esser’s interview with SecurityFocus he announced the upcoming Month of PHP bugs initiative in March.

Quoting:

“The Month of PHP bugs will take place in March 2007. Its goal is to make people and especially the PHP developers aware that bugs in PHP exist. While this sounds obvious for everyone on the outside, it is actually required. PHP has a very bad reputation when it comes to security, which is mostly caused by all the advisories about security holes in PHP applications. For some of the reported bug classes like SQL injection and XSS, this is quite unfair, because those can happen in any language. But Remote File Inclusions, vulnerabilities due to register_globals or other problems within the PHP engine (e.g. zend_hash_del_key_or_index bug) are fully to blame on the PHP language. Unfortunately this kind of thinking is not appreciated by the PHP developers and they continue to claim that PHP is not worse than other languages, and that only badly written PHP applications are the problem. The Month of PHP bugs will show however that a lot of bugs in PHP’s own source code exist.

We will disclose different types of bugs, mainly buffer overflows or double free(/destruction) vulnerabilities, some only local, but some remotely trigger-able (for example, because they are in functions usually exposed to user input). Additionally there are some trivial bypass vulnerabilities in PHP’s own protection features. Only holes within the code shipped with the default distribution of PHP will be disclosed. That means we will not disclose holes in extensions that only exist in PECL, while we are sure that those contain vulnerabilities, too. Most of the holes were previously disclosed to the vendor, but not all.

As a vulnerability reporter you feel kinda puzzled how people among the PHP Security Response Team can claim in public that they do not know about any security vulnerability in PHP, when you disclosed about 20 holes to them in the two weeks before. At this point you stop bothering whether anyone considers the disclosure of unreported vulnerabilities unethical. Additionally a few of the reported bugs have been known for years among the PHP developers and will most probably never be fixed. In total we have more than 31 bugs to disclose, and therefore there will be days when more than one vulnerability will be disclosed.”

As, Ilia Alshanetsky notes, “It would be interesting to see what issues he discovers, hopefully most of them have already been reported to the PHP Security Team, in which case the upcoming 5.2.1 release will provide a resolution path for affected users.”

He also notes, “I have to look at this as a free security audit of PHP by someone with a clue about security and ultimately, in the long run it will only make PHP better, even if March is going to be rather busy…”.

I couldn’t agree more with Ilia…. I want to see what he really discovers.

| 497 Words

OSCON 2007 Call for Papers

So, I submitted my 90 minute conference session proposal entitled, ” Improving Performance by Profiling PHP Applications”.

I think I am going to focus on Advanced PHP Debugger (APD) for this session.
George Schlossnagle was kind enough to offer to help explain APD; and the design decision behind it being an analog of C’s gprof or Perl’s Devel::DProf.

Here’s hoping that “The O’Reilly Open Source Convention 2007 Committee O’Reilly Media, Inc.” selects my awesome entry for a 90 minute conference session.

| 83 Words

Zend Framework Preview 0.7.0

Zend Framework is a simple, straightforward, open-source software framework for PHP 5 designed to eliminate the tedious details of coding and let you focus on the big picture. Its strength is in its highly-modular MVC design, making your code more reusable and easier to maintain. Although it’s currently in preview release, take a look—you may be surprised.

The Zend Framework community has released the 0.7.0 Preview Release.
This release showcases the latest developed classes to support Localization (L10N) and Internationalization (I18N).
This makes it easy to develop world-class PHP applications; here at Schematic.

More details:

• Locale-management component
• Locale-aware Date parsing and formatting class
• New translation-management component with gettext support
• Comprehensive class for working with measurements and conversions
• New prototype class for filtering and validation parameters
• New class for managing memory usage in PHP applications
• Many other improvements in current components such as MVC, SessionGdataHTTP Client, SearchXmlRpc, and others
• Many other enhancements to test suites and documentation.

| 165 Words

RecentChangesCamp 2007

Well, I went to the Recent Changes Camp 2007 this past weekend here in Portland, Oregon and I must say it was interesting. I enjoyed listening to the identity lady and her session about OpenID. It was nice to get a lay-persons perspective on what OpenID is and the types of problems it can solve.

It was timely based on the recent news about Microsoft and their acceptance of OpenID as a standard.

| 72 Words

My New Gig

How come I’m not blogging lately?

Typical reasons, ranging from lots of travel, to project work.

But there is one reason that might stand out: I’m starting with a new company.

I have accepted the position of Senior Architect, Open Source Platforms Group at Schematic, Inc.

| 48 Words